Adafruit ADG729 Dual 1-to-4 Analog Matrix Switch

Name: Adafruit ADG729 Dual 1-to-4 Analog Matrix Switch
Brand: Adafruit
SKU: 5932

Adafruit ADG729 Dual 1-to-4 Analog Matrix Switch — Adafruit — 5932

I2C-controlled breakout for the ADG729 dual analog matrix switch, providing two independent 1-to-4 analog crossbars (eight switch paths total) for signals up to 5 V.

Bare ICs

67 other options

74HC logic gates, MCP3008/MCP23017 ADCs and expanders, 24LC256 EEPROM, 4N25-series optocouplers and ULN2803A drivers — bare DIP chips with no breakout-board conveniences like pull-ups or level shifting.

View all 67

18-Channel 8-bit PWM LED Driver w/ I2C Interface visual preview

Related groups

4 groups

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 176 parts

Converters

ADS1115/MCP3421 ADCs, MCP4725 and GP8413 DACs, CP2102 USB-UART boards, and I2C plumbing like the LTC4316 address shifter — matched to bus, resolution and signal range.

Components · Interface converters · 115 parts

Memory

24LC32/25LC256 EEPROM, I2C FRAM, 64Mbit PSRAM, and microSD breakouts up to 64GB — matched to write frequency and data volume, not just interface.

Components · Memory & storage · 39 parts

Passives

E12 resistor kits, ceramic and electrolytic capacitor sets, 1N4148/1N4007 diodes, TIP120 Darlingtons, IRLZ44N MOSFETs and 100F supercapacitors — bench stock in kit quantities.

Components · Passives · 56 parts