Adafruit QT Py ESP32-S2 WiFi Dev Board with STEMMA QT

Seeed Xiao-form-factor board with single-core ESP32-S2 at 240 MHz, 4 MB flash, 2 MB PSRAM, 2.4 GHz Wi-Fi, native USB-C, and STEMMA QT I2C connector. No Bluetooth. 3.3 V logic with 5 capacitive touch inputs and 10 analog inputs.

USB-C
USB-C port used for both powering and programming the board.
Type · power
3.3V
Output from the 3.3V regulator.
Type · powerVoltage · 3.3 V output, Adafruit states 600 mA peak
GND
Common ground for all power and logic.
Type · groundVoltage · 0 V
5V
5 V out from USB port; can also be used as voltage input with a diode as described by Adafruit.
Type · powerVoltage · 5 V
A0
Analog input on ADC2 and 8-bit DAC output; Adafruit notes A0 has a 10K pullup to 3.3 V.
Type · analogVoltage · ESP32-S2 ADC input, do not exceed 3.3 V / 3.6 V max directly
A1

ESP32

110 other options

Wi-Fi and Bluetooth on a single chip, in every shape from Espressif DevKitC to Adafruit Feathers with STEMMA QT, DFRobot FireBeetles tuned for battery life, and Seeed XIAOs under a thumbnail.

View all 110

ESP32-C3 Super Mini visual preview
ESP32-C3 Super Mini

Related groups

4 groups

Arduino

About 75 boards across every Arduino generation: 5V Uno/Mega/GIGA, 3.3V MKR and Portenta, plus DFRduino and Bluno compatibles. Confirm the voltage rail before stacking any shield.

Boards · Arduino boards · 76 parts

Add-ons

About 270 add-ons across Pi HATs, Arduino shields, and FeatherWings. The same function — motor control, PoE, display — usually ships once per host connector family. Get the host board right first.

Boards · HATs, Shields & add-ons · 272 parts

Other MCUs

Specialists: Teensy for high-clock audio and USB, Adafruit SAMD boards running CircuitPython or the Arduino IDE, proper STM32 eval kits, and the micro:bit classroom ecosystem. Schematik builds target ESP32, Arduino Uno, and Pico; come here when you have a specific reason to.

Boards · Other MCU boards · 226 parts

Pi Pico

The Raspberry Pi MCU line — Pico, Pico 2, and third-party boards on the same silicon — plus a deep bench of Pico-pinout displays, loggers, and radio modules that do nothing without a Pico plugged in.

Boards · Pico & RP2040 boards · 44 parts

Pin	Type	Function	Voltage
USB-C	power	USB-C port used for both powering and programming the board.
3.3V	power	Output from the 3.3V regulator.	3.3 V output, Adafruit states 600 mA peak
GND	ground	Common ground for all power and logic.	0 V
5V	power	5 V out from USB port; can also be used as voltage input with a diode as described by Adafruit.	5 V
A0	analog	Analog input on ADC2 and 8-bit DAC output; Adafruit notes A0 has a 10K pullup to 3.3 V.	ESP32-S2 ADC input, do not exceed 3.3 V / 3.6 V max directly
A1	analog	Analog input on ADC2 and 8-bit DAC output.	ESP32-S2 ADC input, do not exceed 3.3 V / 3.6 V max directly
A2	analog	Analog input on ADC1; can do capacitive touch.	ESP32-S2 ADC input, do not exceed 3.3 V / 3.6 V max directly
A3	analog	Analog input on ADC1; can do capacitive touch.	ESP32-S2 ADC input, do not exceed 3.3 V / 3.6 V max directly
SCL	i2c	Main I2C clock pad; Adafruit lists SCL among capacitive-touch-capable pads.	3 V logic max for serial input per Adafruit QT Py ESP32-S2 pinout page
SDA	i2c	Main I2C data pad; Adafruit lists SDA among capacitive-touch-capable pads.	3 V logic max for serial input per Adafruit QT Py ESP32-S2 pinout page
RX	uart	UART receive pin, connect to TX on sensor or breakout.	3 V logic max for serial input per Adafruit QT Py ESP32-S2 pinout page
TX	uart	UART transmit pin, connect to RX on sensor or breakout; can do capacitive touch.	3 V logic max for serial input per Adafruit QT Py ESP32-S2 pinout page
SCK	spi	SPI clock pin on ESP32-S2 high-speed peripheral.	3 V logic max for serial input per Adafruit QT Py ESP32-S2 pinout page
MI	spi	SPI microcontroller-in / sensor-out pin.	3 V logic max for serial input per Adafruit QT Py ESP32-S2 pinout page
MO	spi	SPI microcontroller-out / sensor-in pin.	3 V logic max for serial input per Adafruit QT Py ESP32-S2 pinout page
STEMMA QT	i2c	JST SH 4-pin STEMMA QT connector breaks out a second I2C interface.	SCL1, SDA1, 3.3 V, GND per Adafruit pinout page

Pinout

Arduino

Add-ons

Other MCUs

Pi Pico