Gravity: Digital Tilt Sensor

Digital tilt sensor using a rolling ball to detect orientation changes, compatible with Arduino and Raspberry Pi. Outputs a digital signal via Gravity connector.

Logical pinout · physical placement not verified

Input1
DFRobot wiki pinout lists this Gravity connector pin as Input; digital tilt sensor signal output used to detect orientation/tilt state.
Type · GPIO
Power2
DFRobot wiki pinout lists this Gravity connector pin as Power for the sensor module.
Type · PowerVoltage · module supply, exact range not stated on the cited pinout table
GND3
DFRobot wiki pinout lists this Gravity connector pin as GND.
Type · GroundVoltage · 0V

Pin	Position	Type	Function	Voltage
Input	1	GPIO	DFRobot wiki pinout lists this Gravity connector pin as Input; digital tilt sensor signal output used to detect orientation/tilt state.
Power	2	Power	DFRobot wiki pinout lists this Gravity connector pin as Power for the sensor module.	module supply, exact range not stated on the cited pinout table
GND	3	Ground	DFRobot wiki pinout lists this Gravity connector pin as GND.	0V

Logical pinout · physical placement not verified

Pin details

3 connections

Input
DFRobot wiki pinout lists this Gravity connector pin as Input; digital tilt sensor signal output used to detect orientation/tilt state.
GPIO
1
Power
DFRobot wiki pinout lists this Gravity connector pin as Power for the sensor module.
PowerVoltage · module supply, exact range not stated on the cited pinout table
2
GND
DFRobot wiki pinout lists this Gravity connector pin as GND.
GroundVoltage · 0V
3

Start wiring

Analog · I2C · UART · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: Power, GND. Schematik maps them to your board in the app.

Other sensors

62 other options

PIR and mmWave presence sensors, Hall-effect and angle encoders, piezo vibration discs, gesture breakouts and more — grouped here because they fit nowhere else.

View all 62

Related groups

4 groups

Biometrics

UART/I2C fingerprint modules, MAX30102 PPG breakouts, and analog ECG/EMG front-ends for access control and hobby biometric sensing.

Sensors · Biometric sensors · 26 parts

Cameras

Pi CSI modules, USB cameras, MCU-class OV2640/OV5640 boards, on-camera AI like HuskyLens and OpenMV, and thermal or ToF imagers — over 130 listings across very different pipelines.

Sensors · Cameras & vision · 141 parts

Power monitors

INA-series I2C monitors, Hall-effect sensors like the ACS723 and Gravity 20A/50A boards, and non-invasive CT clamps for everything from 3.3V rail telemetry to mains current sensing.

Sensors · Current & voltage · 25 parts

Distance sensors

About 180 listings spanning VL53-series ToF breakouts, HC-SR04 and MaxSonar ultrasonics, 360° triangulation LiDARs, IR proximity sensors, 24GHz mmWave presence detection and laser break-beam sensors.

Sensors · Distance sensors · 177 parts