2mm SC-SC Single Mode Duplex Fiber Jumper (50m)

Name: 2mm SC-SC Single Mode Duplex Fiber Jumper (50m)
Brand: DFRobot
SKU: TEL0156

2mm SC-SC Single Mode Duplex Fiber Jumper (50m) — DFRobot — TEL0156

50 m single-mode dual-core fiber patch cable with SC connectors, 2 mm diameter, low insertion loss, for long-distance optical communication systems.

Cables

260 other options

Around 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.

View all 260

Premium Female/Female Jumper Wires - 40 x 6" visual preview

Related groups

4 groups

Connectors

Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.

Connectors & cables · Connectors · 229 parts

USB and serial

Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.

Connectors & cables · USB cables · 95 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 176 parts