JST PH 2mm 4-Pin Socket to Color Coded Cable - 200mm
200mm cable with a JST PH 2mm 4-pin female housing on one end and four color-coded tinned wire ends on the other, for extending or hand-wiring JST PH 4-pin connections.
Pinout
- GND
Black wire, ground, source states “Black for GND”.
Type · Ground - V+
Red wire, positive supply rail, source states “Red for V+”.
Type · Power - SDA
White wire, I2C/data signal, source states “White for SDA”.
Type · I2C - SCL
Green wire, I2C/clock signal, source states “Green for SCL”.
Type · I2C
| Pin | Type | Function |
|---|---|---|
| GND | Ground | Black wire, ground, source states “Black for GND”. |
| V+ | Power | Red wire, positive supply rail, source states “Red for V+”. |
| SDA | I2C | White wire, I2C/data signal, source states “White for SDA”. |
| SCL | I2C | Green wire, I2C/clock signal, source states “Green for SCL”. |
Pin details
4 connections- GND
Black wire, ground, source states “Black for GND”.
Ground - V+
Red wire, positive supply rail, source states “Red for V+”.
Power - SDA
White wire, I2C/data signal, source states “White for SDA”.
I2C - SCL
Green wire, I2C/clock signal, source states “Green for SCL”.
I2C
Cables
260 other optionsAround 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.
"Wire Wrap" Thin Prototyping & Repair Wire - 200m 30AWG Blue visual preview"Wire Wrap" Thin Prototyping & Repair Wire - 200m 30AWG Blue
0.4mm Heat Resistant Welding Wire (Black) visual preview0.4mm Heat Resistant Welding Wire (Black)
0.4mm Heat Resistant Welding Wire (Blue) visual preview0.4mm Heat Resistant Welding Wire (Blue)
0.4mm Heat Resistant Welding Wire (Green) visual preview0.4mm Heat Resistant Welding Wire (Green)
0.4mm Heat Resistant Welding Wire (Red) visual preview0.4mm Heat Resistant Welding Wire (Red)
0.4mm Heat Resistant Welding Wire (White) visual preview0.4mm Heat Resistant Welding Wire (White)
1-Pin Female-Female Jumper Wire 100mm (50 pcs) visual preview1-Pin Female-Female Jumper Wire 100mm (50 pcs)
1-Pin Female-Male Jumper Wire 125mm (50 pcs) visual preview1-Pin Female-Male Jumper Wire 125mm (50 pcs)
10P FPC Programming Cable (180mm) visual preview10P FPC Programming Cable (180mm)
10pcs Alligator Clip Test Lead 500mm - 22AWG visual preview10pcs Alligator Clip Test Lead 500mm - 22AWG
1mm 4-pin Vertical Connector - JST SH Compatible - 10 pack visual preview1mm 4-pin Vertical Connector - JST SH Compatible - 10 pack
2-Pin Female-Female Jumper Wire 300mm (10 pcs) visual preview2-Pin Female-Female Jumper Wire 300mm (10 pcs)
Related groups
4 groups
0.1" (2.54 mm) Arduino Male Pin Headers Straight Green (10PCS) visual previewConnectors
Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.
Connectors & cables · Connectors · 224 parts
5.5/2.1mm DC to Micro USB Adapter visual previewUSB and serial
Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.
Connectors & cables · USB cables · 91 parts
1.75mm PLA (1kg) - Black visual preview3D printing
DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts
10W Super Bright LED - Violet visual previewLED pixels
WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.
Components · Addressable LEDs · 180 parts