JST-PH to Breadboard Jumper (3-pin)

Jumper cable with a 3-pin female JST-PH connector on one end and breadboard-compatible male pin pigtails on the other. Adapts JST-PH peripherals to a standard 2.54mm breadboard.

Logical pinout · physical placement not verified

Conductor 11
one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item
Type · Unknown
Conductor 22
one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item
Type · Unknown
Conductor 33
one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item
Type · Unknown

Pin	Position	Type	Function
Conductor 1	1	Unknown	one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item
Conductor 2	2	Unknown	one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item
Conductor 3	3	Unknown	one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item

Logical pinout · physical placement not verified

Pin details

3 connections

Conductor 1
one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item
Unknown
1
Conductor 2
one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item
Unknown
2
Conductor 3
one straight-through connector contact/conductor; no fixed signal assignment is implied by the sold item
Unknown
3

Cables

260 other options

Around 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.

View all 260

Related groups

4 groups

Connectors

Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.

Connectors & cables · Connectors · 224 parts

USB and serial

Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.

Connectors & cables · USB cables · 91 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 180 parts