Liquid Flow Meter - Brass 1/2" Nominal Threaded

Liquid Flow Meter - Brass 1/2" Nominal Threaded — Adafruit — 833

Inline brass flow meter with a Hall-effect pinwheel sensor; each pulse represents approximately 2 mL of flow. Outputs digital pulses on a yellow wire (5–18 V supply). Not a precision instrument — calibrate carefully if better than 10% accuracy is needed.

Pinout

Logical pinout · physical placement not verified
LIQUID FLOW METER - BRRed wireYellow wireBlack wire
  • Red wire

    5-18VDC power lead for the flow sensor, as stated by the Adafruit product page.

    Type · PowerVoltage · 5-18VDC
  • Black wire

    Ground lead for the flow sensor, as stated by the Adafruit product page.

    Type · GroundVoltage · 0V
  • Yellow wire

    Hall-effect pulse output. Adafruit states each output pulse is approximately 2 millilitres of flow.

    Type · GPIO

Start wiring

Analog · I2C · UART · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: Red wire, Black wire. Schematik maps them to your board in the app.

Other sensors

62 other options

PIR and mmWave presence sensors, Hall-effect and angle encoders, piezo vibration discs, gesture breakouts and more — grouped here because they fit nowhere else.

View all 62

Related groups

4 groups