Particle P1 Wi-Fi Module with Integrated Antenna

Particle P1 Wi-Fi Module with Integrated Antenna — Particle — 317060262

Larger sibling to the P0, adding 1 MB external SPI flash, an integrated PCB antenna, and a u.FL connector for an external antenna. BCM43362 802.11b/g/n, STM32F205 120 MHz, 25 mixed-signal GPIO; FCC/CE/IC certified.

Pinout

Logical pinout · physical placement not verified
PARTICLE P1 WI-FI MODUGNDRSTVBAT_WLTXVDDIO_3V3_WLRXVDD_3V3WKP
  • GND
    Type · Ground
  • VBAT_WL
    Type · Power
  • VDDIO_3V3_WL
    Type · Power
  • VDD_3V3
    Type · Power
  • RST
    Type · Control
  • TX
    Type · UART
  • RX
    Type · UART
  • WKP
    Type · Signal

Start wiring

SPI · UART · Ethernet · 3.3 – 5 V · Breakout

DFRobot describes DFR0174 as an XBee USB Adapter V2 with an Atmega8U2 programmed as a USB-to-serial converter, Micro USB, XBee socket com…

Module pins: VBAT_WL, VDDIO_3V3_WL, VDD_3V3, GND, TX, RX, WKP. Schematik maps them to your board in the app.

Networking

25 other options

ESP8285, ATWINC1500, and EMW3060 Wi-Fi modules; the WIZ5500 Ethernet co-processor; the DP83848 RMII PHY board; 802.11n USB adapters for the Pi; and an XBee USB configuration adapter.

View all 25

Related groups

4 groups