PIR (Motion) Sensor

PIR (Motion) Sensor — Adafruit — 189

Passive infrared motion sensor with adjustable sensitivity and 2–4 s output delay; detects movement up to ~6 m away. Includes a 30 cm cable with socket for remote mounting.

Pinout

Logical pinout · physical placement not verified
PIR (MOTION) SENSOR+ voltage powersignal out- ground power
  • + voltage power

    3-pin Adafruit PIR sensor cable: red cable is + voltage power. The guide says PIR power is usually 3-5VDC input but may be as high as 12V.

    Type · PowerVoltage · usually 3-5VDC input; may be as high as 12V
  • - ground power

    3-pin Adafruit PIR sensor cable: black cable is - ground power.

    Type · GroundVoltage · 0V ground
  • signal out

    3-pin Adafruit PIR sensor cable: yellow is the signal out. The guide describes the PIR output swinging high or low when motion changes the sensed infrared level.

    Type · Signal

Start wiring

Analog · I2C · UART · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: + voltage power, - ground power, signal out. Schematik maps them to your board in the app.

Other sensors

62 other options

PIR and mmWave presence sensors, Hall-effect and angle encoders, piezo vibration discs, gesture breakouts and more — grouped here because they fit nowhere else.

View all 62

Related groups

4 groups