mmWave Radar 24GHz Human Presence Detection Sensor (9m)

mmWave Radar 24GHz Human Presence Detection Sensor (9m), DFRobot, SEN0395

24GHz FMCW mmWave radar detecting human presence (both motion and stillness) up to 9m via serial (115200 baud) or I/O. Operates 3.6–5V at 90mA; 100×40° beam angle, -40 to 85°C range.

Pinout

Logical pinout · physical placement not verified
MMWAVE RADAR 24GHZ HUMUART TxGNDUART RxVCCGPIO1NCGPIO2NC
  • UART TxOfficial table 2 row 1

    Sensor UART Transmiting

    Type · UART
  • UART RxOfficial table 2 row 2

    Sensor UART Receiving

    Type · Power
  • GPIO1Official table 2 row 3

    Universal Input and Output

    Type · GPIO
  • GPIO2Official table 2 row 4

    Universal Input and Output(By default, it outputs high when people presence detected, otherwise, output low)

    Type · GPIO
  • GNDOfficial table 2 row 5

    Ground

    Type · Ground
  • VCCOfficial table 2 row 6

    Power +

    Type · Power
  • NCOfficial table 2 row 7

    Reserved, left floating

    Type · Control
  • NCOfficial table 2 row 8

    Reserved, left floating

    Type · Control

Start wiring

Analog · I2C · UART · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: UART Rx, VCC, GND, UART Tx. Schematik maps them to your board in the app.

Other sensors

62 other options

PIR and mmWave presence sensors, Hall-effect and angle encoders, piezo vibration discs, gesture breakouts and more — grouped here because they fit nowhere else.

View all 62

Related groups

4 groups