Gravity: Geiger Counter Module Ionizing Radiation Detector

Gravity: Geiger Counter Module Ionizing Radiation Detector — DFRobot — SEN0463

M4011 Geiger tube module with digital pulse output, 3.3–5V supply (onboard 380–450V boost for tube). Detects nuclear radiation, X-rays, and cosmic rays; not electromagnetic radiation. Not rated for personal safety dosimetry.

Pinout

Logical pinout · physical placement not verified
GRAVITY: GEIGER COUNTE-D+Signal buzzer switch
  • -1

    Negative power supply. DFRobot SEN0463 wiki pinout lists pin ① as “- Negative power supply”.

    Type · Power
  • +2

    Positive power supply. DFRobot SEN0463 wiki pinout lists pin ② as “+ Positive power supply”.

    Type · Power
  • D3

    Signal output. DFRobot SEN0463 wiki pinout lists pin ③ as “D signal output”; FAQ says the default signal is high level and pulses when the Geiger tube generates a signal.

    Type · Signal
  • Signal buzzer switch4

    On-board signal buzzer switch. DFRobot SEN0463 wiki pinout/switch section lists ④ as “Signal buzzer switch”.

    Type · Control

Start wiring

Analog · I2C · UART · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: -, +, D. Schematik maps them to your board in the app.

Other sensors

62 other options

PIR and mmWave presence sensors, Hall-effect and angle encoders, piezo vibration discs, gesture breakouts and more — grouped here because they fit nowhere else.

View all 62

Related groups

4 groups