WiFly GSX Breakout — DFRobot — TEL0011

Discontinued breakout board for the RN-131g WiFly GSX 802.11b/g module. Exposes all pins on two 17-pin 0.1" headers. Intended for migration from 802.15.4 architectures to TCP/IP WiFi without hardware redesign.

Pinout

Logical pinout · physical placement not verified
WIFLY GSX BREAKOUTVCCRESETGNDGPIO6TXDGPIO9RXD
  • VCC
    Type · Power
  • GND
    Type · Ground
  • TXD
    Type · UART
  • RXD
    Type · UART
  • RESET
    Type · Control
  • GPIO6
    Type · GPIO
  • GPIO9
    Type · GPIO

Start wiring

SPI · UART · Ethernet · 3.3 – 5 V · Breakout

DFRobot describes DFR0174 as an XBee USB Adapter V2 with an Atmega8U2 programmed as a USB-to-serial converter, Micro USB, XBee socket com…

Module pins: VCC, GND, TXD, RXD, GPIO6, GPIO9. Schematik maps them to your board in the app.

Networking

25 other options

ESP8285, ATWINC1500, and EMW3060 Wi-Fi modules; the WIZ5500 Ethernet co-processor; the DP83848 RMII PHY board; 802.11n USB adapters for the Pi; and an XBee USB configuration adapter.

View all 25

Related groups

4 groups