Universal Qi Wireless Charging Module - 20mm Reverse MicroUSB

Qi inductive charging receiver module in a 20mm form factor with a reverse MicroUSB plug. Works with standard Qi transmitters.

Logical pinout · physical placement not verified

USB +5V
MicroUSB receiver power output. Adafruit states these Qi receivers only provide power on the USB +5V and Ground pins.
Type · PowerVoltage · +5V USB power output
USB GND
MicroUSB receiver ground output. Adafruit states these Qi receivers only provide power on the USB +5V and Ground pins.
Type · GroundVoltage · 0V ground return
USB data lines
USB data lines are not provided for charging signalling on this receiver. Adafruit notes some phones need special voltages on data lines and will not charge.
Type · Unknown

Pin	Type	Function	Voltage
USB +5V	Power	MicroUSB receiver power output. Adafruit states these Qi receivers only provide power on the USB +5V and Ground pins.	+5V USB power output
USB GND	Ground	MicroUSB receiver ground output. Adafruit states these Qi receivers only provide power on the USB +5V and Ground pins.	0V ground return
USB data lines	Unknown	USB data lines are not provided for charging signalling on this receiver. Adafruit notes some phones need special voltages on data lines and will not charge.

Logical pinout · physical placement not verified

Pin details

3 connections

USB +5V
MicroUSB receiver power output. Adafruit states these Qi receivers only provide power on the USB +5V and Ground pins.
PowerVoltage · +5V USB power output
USB GND
MicroUSB receiver ground output. Adafruit states these Qi receivers only provide power on the USB +5V and Ground pins.
GroundVoltage · 0V ground return
USB data lines
USB data lines are not provided for charging signalling on this receiver. Adafruit notes some phones need special voltages on data lines and will not charge.
Unknown

Start wiring

I2C · USB · 5 V · Module

Verify supply voltage and logic levels before powering up.

Module pins: USB +5V, USB GND. Schematik maps them to your board in the app.

Charging

46 other options

Single-cell LiPo chargers (TP4056, MicroUSB/Type-C modules), charger/booster combos (PowerBoost 500/1000, Lipo Rider Plus 5V/2.4A), I2C fuel gauges (MAX17048, LC709203F) and Qi wireless charging coils.

View all 46

Related groups

4 groups

Batteries

9V alkaline cells, CR2032 coin cells, 3.7V LiPo packs (1000–1200mAh), 7.4V 2S LiPo, 18650 Li-ion holders (1–6 cells), AA/AAA holders in every configuration, and snap leads with barrel adapters.

Power · Batteries · 104 parts

Power supplies

Wall adapters (5V–24V), adjustable and fixed buck/boost/buck-boost converters (MT3608, LM2596-class), USB-C PD triggers (HUSB238), breadboard supplies, DIN-rail units and passive barrel-jack adapters.

Power · Supplies & regulators · 147 parts

Solar

Solar panels from 1.5V 250mA flexible film to 18V 10W polysilicon, MPPT solar power managers (DFRobot 5V and 9V/12V/18V, Waveshare 6V–24V), bq25185 charger boards and LTC3588 energy-harvesting breakouts.

Power · Solar power · 28 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts