Universal Qi Wireless Charging Module - 40mm Reverse MicroUSB

Qi inductive charging receiver module in a 40mm form factor with a reverse MicroUSB plug. Works with standard Qi transmitters.

Logical pinout · physical placement not verified

USB +5V
MicroUSB output power from the Qi receiver; Adafruit states these receivers only provide power on the USB +5V and Ground pins.
Type · PowerVoltage · +5V output, source: Adafruit product 2115 page
USB GND
MicroUSB output ground from the Qi receiver; Adafruit states these receivers only provide power on the USB +5V and Ground pins.
Type · GroundVoltage · 0V ground reference, source: Adafruit product 2115 page
USB data pins
No charging/data signalling is provided by this receiver; Adafruit notes some phones need data-line voltages and this receiver does not provide data-line connections.
Type · Signal

Pin	Type	Function	Voltage
USB +5V	Power	MicroUSB output power from the Qi receiver; Adafruit states these receivers only provide power on the USB +5V and Ground pins.	+5V output, source: Adafruit product 2115 page
USB GND	Ground	MicroUSB output ground from the Qi receiver; Adafruit states these receivers only provide power on the USB +5V and Ground pins.	0V ground reference, source: Adafruit product 2115 page
USB data pins	Signal	No charging/data signalling is provided by this receiver; Adafruit notes some phones need data-line voltages and this receiver does not provide data-line connections.

Logical pinout · physical placement not verified

Pin details

3 connections

USB +5V
MicroUSB output power from the Qi receiver; Adafruit states these receivers only provide power on the USB +5V and Ground pins.
PowerVoltage · +5V output, source: Adafruit product 2115 page
USB GND
MicroUSB output ground from the Qi receiver; Adafruit states these receivers only provide power on the USB +5V and Ground pins.
GroundVoltage · 0V ground reference, source: Adafruit product 2115 page
USB data pins
No charging/data signalling is provided by this receiver; Adafruit notes some phones need data-line voltages and this receiver does not provide data-line connections.
Signal

Start wiring

I2C · USB · 5 V · Module

Verify supply voltage and logic levels before powering up.

Module pins: USB +5V, USB GND. Schematik maps them to your board in the app.

Charging

46 other options

Single-cell LiPo chargers (TP4056, MicroUSB/Type-C modules), charger/booster combos (PowerBoost 500/1000, Lipo Rider Plus 5V/2.4A), I2C fuel gauges (MAX17048, LC709203F) and Qi wireless charging coils.

View all 46

Related groups

4 groups

Batteries

9V alkaline cells, CR2032 coin cells, 3.7V LiPo packs (1000–1200mAh), 7.4V 2S LiPo, 18650 Li-ion holders (1–6 cells), AA/AAA holders in every configuration, and snap leads with barrel adapters.

Power · Batteries · 104 parts

Power supplies

Wall adapters (5V–24V), adjustable and fixed buck/boost/buck-boost converters (MT3608, LM2596-class), USB-C PD triggers (HUSB238), breadboard supplies, DIN-rail units and passive barrel-jack adapters.

Power · Supplies & regulators · 147 parts

Solar

Solar panels from 1.5V 250mA flexible film to 18V 10W polysilicon, MPPT solar power managers (DFRobot 5V and 9V/12V/18V, Waveshare 6V–24V), bq25185 charger boards and LTC3588 energy-harvesting breakouts.

Power · Solar power · 28 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts