Universal Qi Wireless Receiver Module

Qi inductive charging receiver module based on the TI BQ51013B, outputting 5V at up to 500mA. Works with any standard Qi (WPC) transmitter; connect V+ and GND wires to the project being charged.

Logical pinout · physical placement not verified

V+
Positive 5V output from the Qi wireless receiver module. Adafruit product page says to solder two wires to the V+ and GND pins, and that the receiver manages the coil to provide 5V and 500mA.
Type · PowerVoltage · 5V output, 500mA stated by Adafruit product page
GND
Ground return for the Qi wireless receiver module output. Adafruit product page says to solder two wires to the V+ and GND pins.
Type · GroundVoltage · 0V

Pin	Type	Function	Voltage
V+	Power	Positive 5V output from the Qi wireless receiver module. Adafruit product page says to solder two wires to the V+ and GND pins, and that the receiver manages the coil to provide 5V and 500mA.	5V output, 500mA stated by Adafruit product page
GND	Ground	Ground return for the Qi wireless receiver module output. Adafruit product page says to solder two wires to the V+ and GND pins.	0V

Logical pinout · physical placement not verified

Pin details

2 connections

V+
Positive 5V output from the Qi wireless receiver module. Adafruit product page says to solder two wires to the V+ and GND pins, and that the receiver manages the coil to provide 5V and 500mA.
PowerVoltage · 5V output, 500mA stated by Adafruit product page
GND
Ground return for the Qi wireless receiver module output. Adafruit product page says to solder two wires to the V+ and GND pins.
GroundVoltage · 0V

Start wiring

I2C · USB · 5 V · Module

Verify supply voltage and logic levels before powering up.

Module pins: V+, GND. Schematik maps them to your board in the app.

Charging

46 other options

Single-cell LiPo chargers (TP4056, MicroUSB/Type-C modules), charger/booster combos (PowerBoost 500/1000, Lipo Rider Plus 5V/2.4A), I2C fuel gauges (MAX17048, LC709203F) and Qi wireless charging coils.

View all 46

Related groups

4 groups

Batteries

9V alkaline cells, CR2032 coin cells, 3.7V LiPo packs (1000–1200mAh), 7.4V 2S LiPo, 18650 Li-ion holders (1–6 cells), AA/AAA holders in every configuration, and snap leads with barrel adapters.

Power · Batteries · 104 parts

Power supplies

Wall adapters (5V–24V), adjustable and fixed buck/boost/buck-boost converters (MT3608, LM2596-class), USB-C PD triggers (HUSB238), breadboard supplies, DIN-rail units and passive barrel-jack adapters.

Power · Supplies & regulators · 147 parts

Solar

Solar panels from 1.5V 250mA flexible film to 18V 10W polysilicon, MPPT solar power managers (DFRobot 5V and 9V/12V/18V, Waveshare 6V–24V), bq25185 charger boards and LTC3588 energy-harvesting breakouts.

Power · Solar power · 28 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

Pinout