Waveshare 1.83inch LCD Module Rev2, 240×284 SPI IPS Display
Waveshare Rev2 1.83-inch rounded-corner IPS LCD module with 240×284 resolution, ST7789P controller, 65K colours, 4-wire SPI interface, GH1.25 8-pin cable connector and onboard 3.3V/5V level compatibility. Intended for Raspberry Pi, Arduino, STM32, ESP32 and Pico projects.
Pinout
- VCC1
3.3V/5V power input
Type · PowerVoltage · 3.3V/5V - GND2
Ground
Type · GroundVoltage · 0V - DIN3
SPI MOSI data input
Type · SPI - CLK4
SPI clock input
Type · SPI - CS5
LCD chip select, active low
Type · SPI - DC6
Data/command select
Type · GPIO - RST7
LCD reset, active low
Type · Control - BL8
Backlight control
Type · GPIO
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| VCC | 1 | Power | 3.3V/5V power input | 3.3V/5V |
| GND | 2 | Ground | Ground | 0V |
| DIN | 3 | SPI | SPI MOSI data input | |
| CLK | 4 | SPI | SPI clock input | |
| CS | 5 | SPI | LCD chip select, active low | |
| DC | 6 | GPIO | Data/command select | |
| RST | 7 | Control | LCD reset, active low | |
| BL | 8 | GPIO | Backlight control |
Pin details
8 connections- VCC1
3.3V/5V power input
PowerVoltage · 3.3V/5V - GND2
Ground
GroundVoltage · 0V - DIN3
SPI MOSI data input
SPI - CLK4
SPI clock input
SPI - CS5
LCD chip select, active low
SPI - DC6
Data/command select
GPIO - RST7
LCD reset, active low
Control - BL8
Backlight control
GPIO
Start wiring
SPI · I2C · 3.3 V · 3.3 – 5 V · Breakout
Adafruit describes product 398 as a 16x2 RGB backlight LCD using digital pins for LCD control and PWM pins for the backlight; the product…
Module pins: VCC, GND, DIN, CLK, CS. Schematik maps them to your board in the app.
TFT & LCD
189 other options16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.
0.71" Round LCD Display Module - 160x160, SPI, 65K Colors visual preview0.71" Round LCD Display Module - 160x160, SPI, 65K Colors
0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors visual preview0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors
0.96" IPS LCD Display Module - 160x80, SPI visual preview0.96" IPS LCD Display Module - 160x80, SPI
1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.28inch Round Touch LCD Module, 240×240, IPS, SPI/I2C
1.3" SPI Colour Square LCD (240x240) Breakout visual preview1.3" SPI Colour Square LCD (240x240) Breakout
1.3inch LCD Module, 240×240, IPS, SPI visual preview1.3inch LCD Module, 240×240, IPS, SPI
1.44inch LCD HAT for Raspberry Pi, 128×128, SPI visual preview1.44inch LCD HAT for Raspberry Pi, 128×128, SPI
1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI visual preview1.54inch LCD Module, 240×240, IPS, 65K RGB, SPI
1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C visual preview1.54inch Touch LCD Module, 240×240, IPS, SPI/I2C
1.5inch LCD Module, 240×280, IPS, Rounded, SPI visual preview1.5inch LCD Module, 240×280, IPS, Rounded, SPI
1.8" TFT LCD 160x128 RGB visual preview1.8" TFT LCD 160x128 RGB
$2.95
1.83inch Touch LCD Module, 240×284, IPS, SPI/I2C visual preview1.83inch Touch LCD Module, 240×284, IPS, SPI/I2C
Related groups
4 groups
1.02" E-Ink Display Module - 128x80, Black/White, SPI visual previewE-paper
Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.
Displays · E-paper displays · 101 parts
"Shake" 8x8 LED Matrix visual previewLED displays
Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.
Displays · LED displays · 89 parts
0.49inch OLED Display Module, 64×32, I2C visual previewOLED
About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.
Displays · OLED displays · 30 parts
1.75mm PLA (1kg) - Black visual preview3D printing
DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts