Grove - Single Axis Analog Gyro

Retired single-axis analog gyroscope Grove module based on Coriolis force, measuring angular velocity on the X axis only. Replaced by the Grove 3-Axis Digital Gyro.

Logical pinout · physical placement not verified

SIGGrove connector pin 1 / SIG
Grove analogue output carrying the single-axis gyro sensor signal. Seeed wiki connects the module to analogue port A0 and code reads analogRead(sensor).
Type · AnalogVoltage · Analogue Grove signal, module input voltage 3.3V/5V per Seeed wiki feature list.
NCGrove connector pin 2 / NC
No connection on the standard Grove connector for this analogue sensor. Seeed wiki code comment lists connector order as SIG, NC, VCC, GND.
Type · Control
VCCGrove connector pin 3 / VCC
Supply input for the Grove module.
Type · PowerVoltage · Input Voltage: 3.3V/5V per Seeed wiki feature list.
GNDGrove connector pin 4 / GND
Ground reference for power and analogue signal.
Type · Ground

Pin	Position	Type	Function	Voltage
SIG	Grove connector pin 1 / SIG	Analog	Grove analogue output carrying the single-axis gyro sensor signal. Seeed wiki connects the module to analogue port A0 and code reads analogRead(sensor).	Analogue Grove signal, module input voltage 3.3V/5V per Seeed wiki feature list.
NC	Grove connector pin 2 / NC	Control	No connection on the standard Grove connector for this analogue sensor. Seeed wiki code comment lists connector order as SIG, NC, VCC, GND.
VCC	Grove connector pin 3 / VCC	Power	Supply input for the Grove module.	Input Voltage: 3.3V/5V per Seeed wiki feature list.
GND	Grove connector pin 4 / GND	Ground	Ground reference for power and analogue signal.

Logical pinout · physical placement not verified

Pin details

4 connections

SIG
Grove analogue output carrying the single-axis gyro sensor signal. Seeed wiki connects the module to analogue port A0 and code reads analogRead(sensor).
AnalogVoltage · Analogue Grove signal, module input voltage 3.3V/5V per Seeed wiki feature list.
Grove connector pin 1 / SIG
NC
No connection on the standard Grove connector for this analogue sensor. Seeed wiki code comment lists connector order as SIG, NC, VCC, GND.
Control
Grove connector pin 2 / NC
VCC
Supply input for the Grove module.
PowerVoltage · Input Voltage: 3.3V/5V per Seeed wiki feature list.
Grove connector pin 3 / VCC
GND
Ground reference for power and analogue signal.
Ground
Grove connector pin 4 / GND

Start wiring

I2C · SPI · Analog · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND. Schematik maps them to your board in the app.

IMU & motion

88 other options

Analog accelerometers, 6-DoF accel/gyro chips, 9-DoF combos, on-chip-fusion IMUs and standalone magnetometers — about 90 listings from the ADXL335 to the ICM-20948.

View all 88

Related groups

4 groups

Biometrics

UART/I2C fingerprint modules, MAX30102 PPG breakouts, and analog ECG/EMG front-ends for access control and hobby biometric sensing.

Sensors · Biometric sensors · 26 parts

Cameras

Pi CSI modules, USB cameras, MCU-class OV2640/OV5640 boards, on-camera AI like HuskyLens and OpenMV, and thermal or ToF imagers — over 130 listings across very different pipelines.

Sensors · Cameras & vision · 141 parts

Power monitors

INA-series I2C monitors, Hall-effect sensors like the ACS723 and Gravity 20A/50A boards, and non-invasive CT clamps for everything from 3.3V rail telemetry to mains current sensing.

Sensors · Current & voltage · 25 parts

Distance sensors

About 180 listings spanning VL53-series ToF breakouts, HC-SR04 and MaxSonar ultrasonics, 360° triangulation LiDARs, IR proximity sensors, 24GHz mmWave presence detection and laser break-beam sensors.

Sensors · Distance sensors · 177 parts