SHT-10 Mesh-protected Weather-proof Temperature/Humidity Sensor

Discontinued - you can grab SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1M Cable instead!

VCC
Supply for the SHT-10 weather-proof temperature/humidity sensor cable; Adafruit states the red wire is VCC and the sensor works with 3V or 5V logic.
Type · powerVoltage · 3-5VDC
GND
Ground return on the sensor cable; Adafruit states old-version black or green wire is Ground and newer-version black wire is Ground.
Type · groundVoltage · 0V
Clock
Digital clock line for the SHT-10 interface; Adafruit states the yellow wire is Clock.
Type · signalVoltage · 3V or 5V logic
Data
Digital data line for the SHT-10 interface; Adafruit states old-version blue wire and newer-version green wire are Data.
Type · signalVoltage · 3V or 5V logic

Pin

Start wiring

3-5VDC · 0V

Confirm the data interface matches your host board.

Module pins: VCC, GND, Clock, Data. Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts

Light and colour

Photoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.

Sensors · Light & color sensors · 7 parts