Anemometer Wind Speed Sensor w/Analog Voltage Output

An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease.To use, connect the black wire to power and signal ground, the brown wire to 7-24VDC (we…

Black wire
Power and signal ground. Source says connect the black wire to power and signal ground.
Type · groundVoltage · 0 V reference / ground
Brown wire
Positive supply input. Source says connect the brown wire to 7 to 24 VDC.
Type · powerVoltage · 7 to 24 VDC
Blue wire
Analogue wind-speed output. Source says measure the analogue voltage on the blue wire.
Type · signalVoltage · 0.4 V at 0 m/s to 2.0 V at 32.4 m/s

Pin	Position	Type	Function	Voltage
Black wire		ground	Power and signal ground. Source says connect the black wire to power and signal ground.

Start wiring

0 V reference / ground · 7 to 24 VDC

Verify supply voltage and logic levels before powering up.

Module pins: Brown wire, Black wire, Blue wire. Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts