FLORA 9-DOF Accelerometer/Gyroscope/Magnetometer - LSM9DS0

Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors. Inside are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast…

3V
FLORA sewable power pad for the LSM9DS0 sensor board; Adafruit says to sew conductive thread from the FLORA 3V pin to this sensor.
Type · powerVoltage · 3V logic/power when used with FLORA, per Adafruit product-page wiring text.
SDA
I2C data pad; Adafruit says the sensor has a digital I2C interface and lines up with FLORA SDA.
Type · signal
SCL
I2C clock pad; Adafruit says the sensor has a digital I2C interface and lines up with FLORA SCL.
Type · signal
GND
Ground sewable pad; Adafruit says to sew conductive thread from FLORA GND to this sensor.
Type · ground

Pin	Position	Type	Function

Start wiring

I2C · 3V logic/power when used with FLORA, per Adafruit product-page wiring text.

Confirm the data interface matches your host board.

Module pins: 3V, GND, SDA, SCL. Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts

Light and colour

Photoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.

Sensors · Light & color sensors · 7 parts