9-DoF IMU breakout combining a 3-axis accelerometer, 3-axis magnetometer, and 3-axis gyroscope in the LSM9DS1 over I2C or SPI. Suitable for orientation, heading, and motion tracking in robotics and wearables.
9-DoF IMU breakout combining a 3-axis accelerometer, 3-axis magnetometer, and 3-axis gyroscope in the LSM9DS1 over I2C or SPI. Suitable for orientation, heading, and motion tracking in robotics and wearables.
Main power input for the breakout; Adafruit states to power VIN and GND with 3-5VDC.
3.3V output from the onboard voltage regulator; Adafruit says up to 100mA can be drawn.
Common ground for power and logic.
I2C clock; also SPI clock when using SPI. Adafruit says this pin is level shifted and has a 10K pullup.
I2C data; also SPI MOSI when using SPI. Adafruit says this pin is level shifted and has a 10K pullup.
SPI chip select for the accelerometer and gyro subchip.
SPI chip select for the magnetometer subchip.
SPI MISO output from the accelerometer and gyro subchip.
SPI MISO output from the magnetometer subchip.
Gyro dynamic enable/disable pin broken out by Adafruit; Adafruit notes documentation is limited.
Interrupt output from the accelerometer/gyro subchip.
Interrupt output from the accelerometer/gyro subchip.
Accelerometer/gyro data-ready output.
Magnetometer interrupt output.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| VIN | power | Main power input for the breakout; Adafruit states to power VIN and GND with 3-5VDC. | 3-5VDC input per Adafruit overview | |
| 3V3 | power | 3.3V output from the onboard voltage regulator; Adafruit says up to 100mA can be drawn. | 3.3V output, up to 100mA per Adafruit pinouts | |
| GND | ground | Common ground for power and logic. | ||
| SCL | signal | I2C clock; also SPI clock when using SPI. Adafruit says this pin is level shifted and has a 10K pullup. | 3-5V logic input supported per Adafruit pinouts |
I2C · SPI · Analog · 3.3 – 5 V · Breakout
Confirm the data interface matches your host board.
Module pins: VIN, 3V3, GND, SCL, SDA, CSAG, CSM, SDOAG. Schematik maps them to your board in the app.
Analog accelerometers, 6-DoF accel/gyro chips, 9-DoF combos, on-chip-fusion IMUs and standalone magnetometers — about 90 listings from the ADXL335 to the ICM-20948.
ADXL335 5V-Ready Triple-Axis Accelerometer Breakout visual previewADXL335 5V-Ready Triple-Axis Accelerometer Breakout
10 DOF IMU Sensor (D) visual preview10 DOF IMU Sensor (D)
10-DOF IMU Breakout - L3GD20H + LSM303 + BMP180 visual preview10-DOF IMU Breakout - L3GD20H + LSM303 + BMP180
2-Axis Compass Module (HMC6352) visual preview2-Axis Compass Module (HMC6352)
3-Axis Accelerometer Module ADXL330 visual preview3-Axis Accelerometer Module ADXL330
6 DOF 25KG Digital Servo Educational Desktop Robotic Arm V2 visual preview6 DOF 25KG Digital Servo Educational Desktop Robotic Arm V2
9 Degrees of Freedom - Razor IMU visual preview9 Degrees of Freedom - Razor IMU
9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS0 visual preview9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS0
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 visual previewAdafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055
Adafruit 9-DoF LSM9DS1 Breakout - STEMMA QT / Qwiic visual previewAdafruit 9-DoF LSM9DS1 Breakout - STEMMA QT / Qwiic
Adafruit ADXL343 + ADT7410 Sensor FeatherWing visual previewAdafruit ADXL343 + ADT7410 Sensor FeatherWing
Adafruit L3GD20H Triple-Axis Gyro Breakout Board visual previewAdafruit L3GD20H Triple-Axis Gyro Breakout Board
Biomedical Sensor Pad (10 pack) visual preview
BOSON: Heart Rate Monitor Sensor i20 visual preview
Capacitive Fingerprint Reader visual preview
Capacitive Fingerprint Reader (B) visual previewUART/I2C fingerprint modules, MAX30102 PPG breakouts, and analog ECG/EMG front-ends for access control and hobby biometric sensing.
Sensors · Biometric sensors · 24 parts
0.3M Pixel Serial JPEG Camera Module visual preview
100X Industrial Microscope Lens for Raspberry Pi HQ Camera visual preview
12.3MP Camera Module for NVIDIA Jetson Nano & Raspberry Pi CM3 visual preview
2.4G Wireless Video Transmission Module (640*480 Resolution) visual previewPi CSI modules, USB cameras, MCU-class OV2640/OV5640 boards, on-camera AI like HuskyLens and OpenMV, and thermal or ToF imagers — over 130 listings across very different pipelines.
Sensors · Cameras & vision · 139 parts
0.28 Inch LED Digital DC Voltmeter - Green visual preview
4-ch Current/Voltage/Power Monitor HAT visual preview
Adafruit INA219 FeatherWing visual preview
Adafruit INA219 High Side DC Current Sensor Breakout STEMMA QT visual previewINA-series I2C monitors, Hall-effect sensors like the ACS723 and Gravity 20A/50A boards, and non-invasive CT clamps for everything from 3.3V rail telemetry to mains current sensing.
Sensors · Current & voltage · 24 parts
VL53L1X Time of Flight (ToF) Sensor Breakout visual preview
Solid State TOF LiDAR - CE30-A visual preview
25m Long Distance ToF Laser Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant) visual preview
4-20HR-MaxSonar-WRMI MB7489 Waterproof Ultrasonic Distance Sensor (50~500cm, IP67) visual previewAbout 180 listings spanning VL53-series ToF breakouts, HC-SR04 and MaxSonar ultrasonics, 360° triangulation LiDARs, IR proximity sensors, 24GHz mmWave presence detection and laser break-beam sensors.
Sensors · Distance sensors · 178 parts
| SDA | signal | I2C data; also SPI MOSI when using SPI. Adafruit says this pin is level shifted and has a 10K pullup. | 3-5V logic input supported per Adafruit pinouts |
| CSAG | signal | SPI chip select for the accelerometer and gyro subchip. | 3-5V logic input supported per Adafruit pinouts |
| CSM | signal | SPI chip select for the magnetometer subchip. | 3-5V logic input supported per Adafruit pinouts |
| SDOAG | signal | SPI MISO output from the accelerometer and gyro subchip. | 3V logic output, readable by 5V logic chips per Adafruit pinouts |
| SDOM / DOM | signal | SPI MISO output from the magnetometer subchip. | 3V logic output, readable by 5V logic chips per Adafruit pinouts |
| DEN | control | Gyro dynamic enable/disable pin broken out by Adafruit; Adafruit notes documentation is limited. |
| INT1 | interrupt | Interrupt output from the accelerometer/gyro subchip. | 3V logic output per Adafruit pinouts |
| INT2 | interrupt | Interrupt output from the accelerometer/gyro subchip. | 3V logic output per Adafruit pinouts |
| DRDY | interrupt | Accelerometer/gyro data-ready output. |
| INTM | interrupt | Magnetometer interrupt output. |