SHT30 Temperature And Humidity Sensor - Wired Enclosed Shell

The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. Unlike earlier SHT sensors, this sensor has a true I2C interface.

Red / VCC
Power wire for the enclosed SHT30 sensor.
Type · powerVoltage · 2.15-5VDC per Adafruit product page.
Black / GND
Ground wire for the enclosed SHT30 sensor.
Type · groundVoltage · 0V reference.
Yellow / SCL
I2C clock wire, connect to the controller SCL pin.
Type · signal
White / SDA
I2C data wire, connect to the controller SDA pin.
Type · signal

Pin	Position	Type	Function	Voltage

Start wiring

I2C · 2.15-5VDC per Adafruit product page. · 0V reference.

Confirm the data interface matches your host board.

Module pins: Red / VCC, Black / GND, Yellow / SCL, White / SDA. Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts

Light and colour

Photoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.

Sensors · Light & color sensors · 7 parts

Pinout

Start wiring

Air quality

Temp and humidity

Environment sensors

Light and colour