
Inline brass flow meter with a Hall-effect pinwheel sensor; each pulse represents approximately 2 mL of flow. Outputs digital pulses on a yellow wire (5–18 V supply). Not a precision instrument — calibrate carefully if better than 10% accuracy is needed.
5-18VDC power lead for the flow sensor, as stated by the Adafruit product page.
Ground lead for the flow sensor, as stated by the Adafruit product page.
Hall-effect pulse output. Adafruit states each output pulse is approximately 2 millilitres of flow.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| Red wire | power | 5-18VDC power lead for the flow sensor, as stated by the Adafruit product page. |
Analog · I2C · UART · 3.3 – 5 V · Breakout
Verify supply voltage and logic levels before powering up.
Module pins: Red wire, Black wire. Schematik maps them to your board in the app.
PIR and mmWave presence sensors, Hall-effect and angle encoders, piezo vibration discs, gesture breakouts and more — grouped here because they fit nowhere else.
Biomedical Sensor Pad (10 pack) visual preview
BOSON: Heart Rate Monitor Sensor i20 visual preview
Capacitive Fingerprint Reader visual preview
Capacitive Fingerprint Reader (B) visual previewUART/I2C fingerprint modules, MAX30102 PPG breakouts, and analog ECG/EMG front-ends for access control and hobby biometric sensing.
Sensors · Biometric sensors · 24 parts
0.3M Pixel Serial JPEG Camera Module visual preview
100X Industrial Microscope Lens for Raspberry Pi HQ Camera visual preview
12.3MP Camera Module for NVIDIA Jetson Nano & Raspberry Pi CM3 visual preview
2.4G Wireless Video Transmission Module (640*480 Resolution) visual previewPi CSI modules, USB cameras, MCU-class OV2640/OV5640 boards, on-camera AI like HuskyLens and OpenMV, and thermal or ToF imagers — over 130 listings across very different pipelines.
Sensors · Cameras & vision · 139 parts
0.28 Inch LED Digital DC Voltmeter - Green visual preview
4-ch Current/Voltage/Power Monitor HAT visual preview
Adafruit INA219 FeatherWing visual preview
Adafruit INA219 High Side DC Current Sensor Breakout STEMMA QT visual previewINA-series I2C monitors, Hall-effect sensors like the ACS723 and Gravity 20A/50A boards, and non-invasive CT clamps for everything from 3.3V rail telemetry to mains current sensing.
Sensors · Current & voltage · 24 parts
VL53L1X Time of Flight (ToF) Sensor Breakout visual preview
Solid State TOF LiDAR - CE30-A visual preview
25m Long Distance ToF Laser Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant) visual preview
4-20HR-MaxSonar-WRMI MB7489 Waterproof Ultrasonic Distance Sensor (50~500cm, IP67) visual previewAbout 180 listings spanning VL53-series ToF breakouts, HC-SR04 and MaxSonar ultrasonics, 360° triangulation LiDARs, IR proximity sensors, 24GHz mmWave presence detection and laser break-beam sensors.
Sensors · Distance sensors · 178 parts
| 5-18VDC |
| Black wire | ground | Ground lead for the flow sensor, as stated by the Adafruit product page. | 0V |
| Yellow wire | digital output | Hall-effect pulse output. Adafruit states each output pulse is approximately 2 millilitres of flow. |
10K Precision Epoxy Thermistor 3950 NTC