Arduino 101 (Genuino)

Arduino 101 (Genuino) — Arduino — DFR0436

Development board based on Intel Curie with built-in 6-axis accelerometer/gyroscope and Bluetooth LE. Runs at 3.3 V logic with 14 digital I/O pins at 32 MHz.

Pinout

Logical pinout · physical placement not verified
ARDUINO 101 (GENUINO)D0RXA0D1TXA1D2A2D3A3D4A4D5A5D6SDAD7SCLD8IOREFD93.3VD105VD11VIND12GNDD13RESET

2 grouped source records are expanded into separate logical pads where unambiguous; physical placement is not implied.

  • D0RX
    Type · GPIO, UART
  • D1TX
    Type · GPIO, UART
  • D2–D13
    Type · Signal
  • A0–A5
    Type · Signal
  • SDA
    Type · I2C
  • SCL
    Type · I2C
  • IOREF
    Type · Power
  • 3.3V
    Type · Power
  • 5V
    Type · Power
  • VIN
    Type · Power
  • GND
    Type · Ground
  • RESET
    Type · Control

Start wiring

I2C · SPI · Analog · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: IOREF, 3.3V, 5V, VIN, GND, D0/RX, D1/TX, D2–D13. Schematik maps them to your board in the app.

IMU & motion

88 other options

Analog accelerometers, 6-DoF accel/gyro chips, 9-DoF combos, on-chip-fusion IMUs and standalone magnetometers — about 90 listings from the ADXL335 to the ICM-20948.

View all 88

Related groups

4 groups