Gravity: Analog Triple Axis Accelerometer MMA7260

Gravity: Analog Triple Axis Accelerometer MMA7260 — DFRobot — DFR0068

3-axis analog accelerometer based on the MMA7260 with selectable g-range, operating on 3.3–8V. Outputs analog voltages per axis; requires ADC on host. Low-power design suits battery applications.

Pinout

Logical pinout · physical placement not verified
GRAVITY: ANALOG TRIPLESignalGNDVCC
  • SignalGravity 3-pin signal

    Analogue/digital signal output on the documented Gravity 3-pin connector.

    Type · Signal
  • VCCGravity 3-pin power

    Supply input on the documented Gravity 3-pin connector.

    Type · Power
  • GNDGravity 3-pin ground

    Ground return on the documented Gravity 3-pin connector.

    Type · Ground

Start wiring

I2C · SPI · Analog · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND, Signal. Schematik maps them to your board in the app.

IMU & motion

88 other options

Analog accelerometers, 6-DoF accel/gyro chips, 9-DoF combos, on-chip-fusion IMUs and standalone magnetometers — about 90 listings from the ADXL335 to the ICM-20948.

View all 88

Related groups

4 groups