SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)

The sensor measures temperature and humidity with high accuracy, has a waterproof probe, and interfaces via I2C. It is compatible with microcontrollers.

Red1
VCC supply lead for the SHT20 waterproof probe
Type · powerVoltage · 3.3V/5V operating voltage per DFRobot wiki specification
Green2
GND lead
Type · ground
Black (Blue)3
SDA I2C data lead
Type · signal
White (Yellow)4
SCL I2C clock lead
Type · signal

Pin	Position

Start wiring

I2C · 3.3V/5V operating voltage per DFRobot wiki specification

Confirm the data interface matches your host board.

Module pins: Red, Green, Black (Blue), White (Yellow). Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 29 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts

Light and colour

Photoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.

Sensors · Light & color sensors · 6 parts

Red	1	power	VCC supply lead for the SHT20 waterproof probe	3.3V/5V operating voltage per DFRobot wiki specification
Green	2	ground	GND lead
Black (Blue)	3	signal	SDA I2C data lead
White (Yellow)	4	signal	SCL I2C clock lead

Pinout

Start wiring

Air quality

Temp and humidity

Environment sensors

Light and colour