Gravity: Analog Ambient Light Sensor TEMT6000 (1~1000 Lux)

The module uses a light sensor with human eye-like spectral response to detect light density, outputting analog voltage for Arduino control, with a 1-1000 Lux range.

GND
Ground connection. DFRobot SEN0043 wiki pinout table lists black cable as GND.
Type · ground
VCC
Supply input. DFRobot SEN0043 wiki specification gives DC 3.3-5.5V supply voltage and the pinout table lists red cable as VCC.
Type · powerVoltage · DC 3.3-5.5V
OUT / output
Analogue voltage output. DFRobot SEN0043 wiki states output is analogue voltage, 0-5V at VCC=5V, and the pinout table lists the other cable as output.
Type · analogVoltage · 0-5V analogue output at VCC=5V

Pin	Position	Type	Function	Voltage
GND		ground	Ground connection. DFRobot SEN0043 wiki pinout table lists black cable as GND.

Start wiring

Analog · DC 3.3-5.5V · 0-5V analogue output at VCC=5V

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND, OUT / output. Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 29 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts

Light and colour

Photoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.

Sensors · Light & color sensors · 6 parts

Pinout

Start wiring

Air quality

Temp and humidity

Environment sensors

Light and colour