FLORA 9-DOF Accelerometer/Gyroscope/Magnetometer - LSM9DS0

Wearable FLORA breakout with the LSM9DS0 9-DOF IMU (3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer) over I2C, sewable via SDA/SCL/3V/GND pads.

Logical pinout · physical placement not verified

3V
FLORA sewable power pad for the LSM9DS0 sensor board; Adafruit says to sew conductive thread from the FLORA 3V pin to this sensor.
Type · PowerVoltage · 3V logic/power when used with FLORA, per Adafruit product-page wiring text.
SDA
I2C data pad; Adafruit says the sensor has a digital I2C interface and lines up with FLORA SDA.
Type · I2C
SCL
I2C clock pad; Adafruit says the sensor has a digital I2C interface and lines up with FLORA SCL.
Type · I2C
GND
Ground sewable pad; Adafruit says to sew conductive thread from FLORA GND to this sensor.
Type · Ground

Pin	Type	Function	Voltage
3V	Power	FLORA sewable power pad for the LSM9DS0 sensor board; Adafruit says to sew conductive thread from the FLORA 3V pin to this sensor.	3V logic/power when used with FLORA, per Adafruit product-page wiring text.
SDA	I2C	I2C data pad; Adafruit says the sensor has a digital I2C interface and lines up with FLORA SDA.
SCL	I2C	I2C clock pad; Adafruit says the sensor has a digital I2C interface and lines up with FLORA SCL.
GND	Ground	Ground sewable pad; Adafruit says to sew conductive thread from FLORA GND to this sensor.

Logical pinout · physical placement not verified

Pin details

4 connections

3V
FLORA sewable power pad for the LSM9DS0 sensor board; Adafruit says to sew conductive thread from the FLORA 3V pin to this sensor.
PowerVoltage · 3V logic/power when used with FLORA, per Adafruit product-page wiring text.
SDA
I2C data pad; Adafruit says the sensor has a digital I2C interface and lines up with FLORA SDA.
I2C
SCL
I2C clock pad; Adafruit says the sensor has a digital I2C interface and lines up with FLORA SCL.
I2C
GND
Ground sewable pad; Adafruit says to sew conductive thread from FLORA GND to this sensor.
Ground

Start wiring

I2C · SPI · Analog · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: 3V, GND, SDA, SCL. Schematik maps them to your board in the app.

IMU & motion

88 other options

Analog accelerometers, 6-DoF accel/gyro chips, 9-DoF combos, on-chip-fusion IMUs and standalone magnetometers — about 90 listings from the ADXL335 to the ICM-20948.

View all 88

Related groups

4 groups

Biometrics

UART/I2C fingerprint modules, MAX30102 PPG breakouts, and analog ECG/EMG front-ends for access control and hobby biometric sensing.

Sensors · Biometric sensors · 26 parts

Cameras

Pi CSI modules, USB cameras, MCU-class OV2640/OV5640 boards, on-camera AI like HuskyLens and OpenMV, and thermal or ToF imagers — over 130 listings across very different pipelines.

Sensors · Cameras & vision · 141 parts

Power monitors

INA-series I2C monitors, Hall-effect sensors like the ACS723 and Gravity 20A/50A boards, and non-invasive CT clamps for everything from 3.3V rail telemetry to mains current sensing.

Sensors · Current & voltage · 25 parts

Distance sensors

About 180 listings spanning VL53-series ToF breakouts, HC-SR04 and MaxSonar ultrasonics, 360° triangulation LiDARs, IR proximity sensors, 24GHz mmWave presence detection and laser break-beam sensors.

Sensors · Distance sensors · 177 parts