Adafruit AS7341 10-Channel Light / Color Sensor Breakout - STEMMA QT / Qwiic

The Adafruit AS7341 10-Channel Light / Color Sensor Breakout is a multi-channel spectrometer, which is a special type of light sensor that is able to detect not only the amount of light present but also the amounts of light within different wavelengths.

VIN
Power input; Adafruit Learn says the onboard regulator accepts 3-5VDC for the 1.8V sensor chip.
Type · powerVoltage · 3-5VDC input
GND
Common ground for power and logic.
Type · ground
SCL
I2C clock; Adafruit Learn says it is level shifted for 3-5V logic with a 10K pullup.
Type · signalVoltage · 3-5V logic tolerant
SDA
I2C data; Adafruit Learn says it is level shifted for 3-5V logic with a 10K pullup.
Type · signalVoltage · 3-5V logic tolerant
INT
Interrupt pin that can be pulled low when configured conditions are met, such as new measurement data.
Type · signal
STEMMA QT

Start wiring

I2C · 3-5VDC input · 3-5V logic tolerant

Confirm the data interface matches your host board.

Module pins: VIN, GND, SCL, SDA, INT. Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 31 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts

Light and colour

Photoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.

Sensors · Light & color sensors · 7 parts