
Analog Devices has followed up on their popular classic, the ADXL345, with this near-drop-in-replacement, the ADXL343.
Input to 3.3V regulator and logic-level reference.
3.3V regulator output.
Common ground connection.
I2C clock line.
I2C data line.
SPI clock when used in SPI mode.
SPI MOSI when used in SPI mode.
SPI MISO, also I2C alternate address select.
SPI chip select.
Interrupt output 1.
Interrupt output 2.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| VIN | Power pins | power | Input to 3.3V regulator and logic-level reference. | |
| 3V3 | Power pins | power | 3.3V regulator output. | |
| GND | Power pins | ground | Common ground connection. | |
| SCL | I2C pins | i2c | I2C clock line. | |
| SDA |
I2C · SPI
Confirm the data interface matches your host board.
Module pins: VIN, 3V3, GND, SCL, SDA, SCK/SCL, SDI/SDA, SDO/ALT ADDR. Schematik maps them to your board in the app.
MQ-2 Gas Sensor visual preview
MQ-3 Gas Sensor visual preview
MQ-135 Gas Sensor visual preview
Grove - Air quality sensor visual previewChoose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.
Sensors · Gas & air-quality sensors · 29 parts
Gravity: DHT11 Temperature & Humidity Sensor For Arduino visual preview
MIKROE DHT22 2 Click visual preview
MIKROE DHT22 Click visual preview
DHT20 - AHT20 Pin Module - I2C Temperature and Humidity Sensor visual previewDHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.
Sensors · Environment sensors · 19 parts
Gravity: DHT11 Temperature & Humidity Sensor For Arduino visual preview
Fermion: ENS160+BME280 Environmental Sensor - TVOC, eCO2, Temp & Humidity (Breakout) visual preview
MIKROE DHT22 2 Click visual preview
MIKROE DHT22 Click visual previewChoose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.
Sensors · Environment sensors · 8 parts
Photo cell (CdS photoresistor) visual preview
TCS3200 Color Sensor visual preview
Adafruit APDS9999 Proximity, Lux Light & Color Sensor visual preview
Adafruit AS7341 10-Channel Light / Color Sensor Breakout visual previewPhotoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.
Sensors · Light & color sensors · 6 parts
| I2C pins |
| i2c |
| I2C data line. |
| SCK/SCL | SPI pins | spi | SPI clock when used in SPI mode. |
| SDI/SDA | SPI pins | spi | SPI MOSI when used in SPI mode. |
| SDO/ALT ADDR | Other pins | spi | SPI MISO, also I2C alternate address select. |
| CS | SPI pins | spi | SPI chip select. |
| INT1 | Interrupt pins | digital io | Interrupt output 1. |
| INT2 | Interrupt pins | digital io | Interrupt output 2. |