Adafruit TMAG5273 A1 3D Hall Effect Magnetometer Breakout

Adafruit TMAG5273 A1 3D Hall Effect Magnetometer Breakout — Adafruit — 6489
Availability
In stock

STEMMA QT/Qwiic breakout for the TMAG5273 A1 low-power 3-axis Hall-effect magnetometer with ±40/±80 mT ranges and I2C interface. The A1 variant covers lower field strengths; use A2 for higher-range applications. Supports 3–5 V logic with interrupt pin.

Pinout

Logical pinout · physical placement not verified
ADAFRUIT TMAG5273 A1 3VINSDA3VoSTEMMA QT connectorsGNDINTSCLPower LED jumper
  • VIN
    Type · Power
  • 3Vo
    Type · Power
  • GND
    Type · Ground
  • SCL
    Type · I2C
  • SDA
    Type · I2C
  • STEMMA QT connectors
    Type · I2C
  • INT
    Type · GPIO
  • Power LED jumper
    Type · Unknown

Start wiring

I2C · SPI · Analog · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: VIN, GND, SCL, SDA. Schematik maps them to your board in the app.

IMU & motion

88 other options

Analog accelerometers, 6-DoF accel/gyro chips, 9-DoF combos, on-chip-fusion IMUs and standalone magnetometers — about 90 listings from the ADXL335 to the ICM-20948.

View all 88

Related groups

4 groups