Adafruit Triple-axis Magnetometer - LIS3MDL

Adafruit Triple-axis Magnetometer - LIS3MDL — Adafruit — 0606034881181

LIS3MDL magnetometer breakout with ±4/8/12/16 gauss selectable range and 16-bit output at up to 1000Hz via I2C or SPI. Includes STEMMA QT connectors; compatible with 3.3V and 5V logic.

Pinout

Logical pinout · physical placement not verified
ADAFRUIT TRIPLE-AXIS MVinSTEMMA QT connectors3VoDOAD1MISOGNDCSSCLINTSCK

2 grouped source records are expanded into separate logical pads where unambiguous; physical placement is not implied.

  • Vin
    Type · Power
  • 3Vo
    Type · Power
  • GND
    Type · Ground
  • SCLSCK
    Type · I2C, SPI
  • SDASDIMOSI
    Type · I2C, SPI
  • STEMMA QT connectors
    Type · I2C
  • DOAD1MISO
    Type · GPIO, SPI
  • CS
    Type · SPI
  • INT
    Type · Signal

Start wiring

I2C · SPI · Analog · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: Vin, GND. Schematik maps them to your board in the app.

IMU & motion

88 other options

Analog accelerometers, 6-DoF accel/gyro chips, 9-DoF combos, on-chip-fusion IMUs and standalone magnetometers — about 90 listings from the ADXL335 to the ICM-20948.

View all 88

Related groups

4 groups