BME280

Bosch BME280 combined temperature, humidity, and barometric pressure sensor. Supports I2C (address 0x76 or 0x77 via SDO) and SPI interfaces. IC supply range is 1.71–3.6V for VDD and 1.2–3.6V for VDDIO; use 3.3V logic with ESP32.

VCC
3.3V power supply for typical breakout use; BME280 IC VDD range is 1.71–3.6V
Type · powerVoltage · 3.3
GND
Ground
Type · ground
SDA
I2C data line (shared bus with SSD1306)
Type · i2c
SCL
I2C clock line (shared bus with SSD1306)
Type · i2c
SDO
I2C address select: LOW = 0x76, HIGH = 0x77
Type · digital

Pin

Start wiring

I2C · SPI · 3.3

Confirm the data interface matches your host board.

Module pins: VCC, GND, SDA, SCL. Schematik maps them to your board in the app.

Related groups

4 groups

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 29 parts

Temp and humidity

DHT11, DHT22/AM2302, and DHT20/AHT20 sensors solve the same broad job, but only some are acceptable substitutes in the same circuit.

Sensors · Environment sensors · 19 parts

Environment sensors

Choose between temperature-only, temperature/humidity, pressure and indoor air-quality modules without treating every environmental sensor as a drop-in substitute.

Sensors · Environment sensors · 8 parts

Light and colour

Photoresistors and color sensors both respond to light, but they expose very different signals and are not sensible drop-in substitutes.

Sensors · Light & color sensors · 6 parts