5mm Green LED

Standard through-hole 5mm green indicator LED (Kingbright L-7113GD or equivalent). Requires a current-limiting series resistor.

Logical pinout · physical placement not verified

Anode
Positive LED terminal. Connect through a current-limiting resistor.
Type · Unknown
Cathode
Negative LED terminal.
Type · Unknown

Pin	Type	Function
Anode	Unknown	Positive LED terminal. Connect through a current-limiting resistor.
Cathode	Unknown	Negative LED terminal.

Logical pinout · physical placement not verified

Pin details

2 connections

Anode
Positive LED terminal. Connect through a current-limiting resistor.
Unknown
Cathode
Negative LED terminal.
Unknown

Passives

57 other options

E12 resistor kits, ceramic and electrolytic capacitor sets, 1N4148/1N4007 diodes, TIP120 Darlingtons, IRLZ44N MOSFETs and 100F supercapacitors — bench stock in kit quantities.

View all 57

Related groups

4 groups

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 180 parts

Bare ICs

74HC logic gates, MCP3008/MCP23017 ADCs and expanders, 24LC256 EEPROM, 4N25-series optocouplers and ULN2803A drivers — bare DIP chips with no breakout-board conveniences like pull-ups or level shifting.

Components · Integrated circuits · 68 parts

Converters

ADS1115/MCP3421 ADCs, MCP4725 and GP8413 DACs, CP2102 USB-UART boards, and I2C plumbing like the LTC4316 address shifter — matched to bus, resolution and signal range.

Components · Interface converters · 114 parts

Memory

24LC32/25LC256 EEPROM, I2C FRAM, 64Mbit PSRAM, and microSD breakouts up to 64GB — matched to write frequency and data volume, not just interface.

Components · Memory & storage · 39 parts